02-25-2013 07:32 AM - edited 03-04-2019 07:07 PM
Hello! I have a cisco-4948-10ge (12.2.54.sg1), and i want to monitor condition of optic transceivers (Rx/Tx power) by snmp. I found this oids:
tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-OPTICAL-MONITOR-MIB
When i try to snmpwalk, i get this SNMPv2-SMI::enterprises.9.9.264 = No Such Object available on this agent at this OID. As I understand, these oids are supported by ONS 15xxx platforms.
Is there any way to get a possibility of using this oids on my cisco switch?
02-26-2013 12:30 AM
Anyone?
03-14-2015 06:59 PM
What you are looking for is located in ENTITY-SENSOR-MIB::entSensorValueTable
Just make sure you turn on DOM monitoring with:
!
service unsupported-transceiver
!
transceiver type all
monitoring
!
$ snmptable -Cf "," -M +/home/sekleckib/MIBS -v2c -c COMMUNITY-STRING [SwitchLoopback] CISCO-ENTITY-SENSOR-MIB::entSensorValueTable
SNMP table: CISCO-ENTITY-SENSOR-MIB::entSensorValueTable
entSensorType,entSensorScale,entSensorPrecision,entSensorValue,entSensorStatus,entSensorValueTimeStamp,entSensorValueUpdateRate,entSensorMeasuredEntity
celsius,units,1,397,ok,25:19:46:12.30,600 seconds,9125992
voltsDC,units,1,32,ok,25:19:46:12.30,600 seconds,9125992
amperes,milli,1,159,ok,25:19:46:12.30,600 seconds,9125992
dBm,units,1,-59,ok,25:19:46:12.30,600 seconds,9125992
dBm,units,1,-37,ok,25:19:46:12.30,600 seconds,9125992
celsius,units,1,400,ok,25:19:46:13.42,600 seconds,9125992
voltsDC,units,1,32,ok,25:19:46:13.42,600 seconds,9125992
amperes,milli,1,146,ok,25:19:46:13.42,600 seconds,9125992
dBm,units,1,-60,ok,25:19:46:13.42,600 seconds,9125992
dBm,units,1,-108,ok,25:19:46:13.42,600 seconds,9125992
03-14-2015 07:00 PM
Also you should rename your Thread's subject to disambiguate it:
"SFP DOM Optical Light Level monitoring on Catalyst 4948 via SNMP MIB"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide