Hi everyoneI have simple schemeIt works but I want to replace D-Link-1210-48 to Cisco-3560G with SFP GLC-SX-MMAnd I have some problem with that.The problem is - it's do NOT working.When I build the short scheme on my desk Cisco2960s -> DLinkDMC-700SC...
Hi !I have Cisco-WS-C3650-24TD-L (cat3k_caa-universalk9.SPA.03.06.06.E.152-2.E6.bin) and I want to monitoring SFP DOM sensors (SFP-10GBase-SR). I can see the data of SFP DOM on CLI
#show interfaces transceiver detailmA: milliamperes, dBm: decibels (m...
Is there any analog of command "show mls qos dscp-output-q" in mqc environment?
I want to understand where every dscp will go. I just know that 32, 48, 54 will go to queue 0
Hello! I have a cisco-4948-10ge (12.2.54.sg1), and i want to monitor condition of optic transceivers (Rx/Tx power) by snmp. I found this oids:tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-OPTICAL-MONITOR-MIBWhen i try to ...
Hello, colleagues. Ive got a 494810ge switch, and this parameters are important for me:sh int gi 1/4 counters detail Port InBytes InUcastPkts InMcastPkts InBcastPkts Gi1/4 252819467437788 173264735013 ...
Hi Seb, Yes, it's first thing I was trying to do.There are two fiber link (four fiber strands).Maybe some one has proof that the SFP GLC-SX-MM can work with D'Link DMC-700SC?I've been try two Cisco-3650, three D'Link DMC-700SC, and a few SFP GLC-SX-...
Thanks for your help. You right, the string I was walking contain physical description value. My 2960s has contain there this strings: SNMPv2-SMI::mib-2.47.1.1.1.1.2.1074 = STRING: "SFP-10GBase-LR"SNMPv2-SMI::mib-2.47.1.1.1.1.2.1075 = STRING: "TenGig...
"as I understand it, the 3850 has only one default queue for all traffic (which includes control traffic)."
Here
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3850-series-switches/200594-Catalyst-3850-Troubleshooting-Output-dr.html
th...