I am facing a very peculiar issue with SNMP.
Every thing workfine when i put
snmp-server group snmpgroup v3 auth in the running config and save it but once the
switch get reloaded i see this in the running config and my NMS tool do not show that the
router is up.
Any idea why is this happening
snmp-server group snmpgroup v3 auth read notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF
snmp-server group snmpgrp v3 auth
groupname: snmpgrp security model:v3 auth
readview :v1default writeview: <no writeview specified>
notifyview: <no notifyview specified>
row status: active
groupname: snmpgroup security model:v3 auth
readview :<no readview specified> writeview: <no writeview specified>
Try to reconfigure your SNMP configuration. And try. If still you are getting same problem then only solution is to upgrade it and use some other NMS tool.
After doing a lot of research i was able to resolve the issue.
I found that the string is present in the SNMP view internet.
So i excluded the string form the view and after doing that evry thing worked fine.
I dont know what all the command did when i removed it but the issue is resolved.
show snmp view
v1default iso - included volatile active
v1default internet.6.3.15 - excluded volatile active
v1default internet.6.3.16 - excluded volatile active
v1default internet.6.3.18 - excluded volatile active
notifyview internet - included nonvolatile active
*tv.FFFFFFFF.FFFFFFFF.FFFFFFFF internet - included volatile active
snmp-server view notifyview internet excluded.
sh snmp view
notifyview internet - excluded nonvolatile active
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: