11-07-2013 12:31 PM - edited 03-04-2019 09:31 PM
Hello,
Our ISP ordered SPA-1XCHSTM1/OC3 card from my company, for his plenty of customers. I want to know how i can configure the card, Can anybody route me to the configuration example for confguring the card. also it will be more clear view if anybody can share a topology showing how it is useful in ISP network.
Thanks
11-09-2013 06:32 AM
Hello,
Nobody has expierience with this card, I am waiting for the experts reply. Anybody can route me to configuration example.
Thanks
11-11-2013 02:01 PM
Here you go : ASR config example
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/ASRcstm1.pdf
7600 series routers SPA configuration examples:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76pref.html
Good luck ... Rate helpfull posts please
Sent from Cisco Technical Support iPad App
11-18-2013 01:02 PM
Hello
I am configuring channelized E1 on 7600 according to the link below
On E1 Configuration (Channelized T3/E3 mode) section on the link i dont get the command specified in the link, i have only the below option.
Router(config-ctrlr-sts1)#?
Sonet/SDH Configuration Commands
exit Exit from Sonet/SDH Path configuration mode
idle Specify idle pattern for all channels in the path
mode Specify path operation mode
no Negate a command or set its defaults
overhead Configure sonet path overhead flags
shutdown Shut down the Sonet/SDH path
threshold Set Path BER threshold values
vtg vt-15 configuration
can anybody help me to configure the card professionally as such it is working live for somebody network.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide