static routing configured, not able to ping

[anandu1797]

Hey guys, I have a current setup as shown in the screenshot, my aim is to ping to the other device and I configured static route for the routers but I am not able to ping. Can anyone suggest what to be done by seeing the screenshots?  

[Jon Marshall]

On the router on the left in your diagram - 

ip route 192.168.200.0 255.255.255.0 10.1.1.x (the 10.1.1.x IP is the router on the right). 

On the router on the right - 

ip route 192.168.100.0 255.255.255.0 10.1.1.x (the 10.1.1.x IP is the router on the left)

Jon

[anandu1797]

I have already executed those commands and not able to ping 

[Jon Marshall]

Not according to the outputs you posted. 

Can you post the configurations of both routers. 

Jon

[anandu1797]

find the screenshots below

[Georg Pauwen]

Hello,

post the zipped Packet Tracer project (.pkt) file...

[tommus719]

probably you just forgot to enter the default gateway on the PCs config tab

[anandu1797]

Gateways were already added 

[tommus719]

post your PT file

[anandu1797]

Please check this out

[anandu1797]

Hey guys, I figured it out. The gateway for PC and IP address for interface connected to PC were different. I made it same and now I am able to ping