cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1122
Views
0
Helpful
2
Replies
Highlighted
VIP Mentor

Sup2T is not booting after deleting vlan.dat file

Hi Guys,

We have recently purchased new Sup2T to replace the Sup720. When we tried to copy the vlan.dat file across we are facing this issue. Sup2T is not booting up once delete the  original vlan.dat file  of the Sup2T & reload.  Here is the console output during the process. Can anyone help what to do to get this Sup2T working.

Router#delete const_nvram:vlan.dat

Delete filename [vlan.dat]?

Delete const_nvram:vlan.dat? [confirm]

Router#

!

Router#reload

System configuration has been modified. Save? [yes/no]: n

Proceed with reload? [confirm]y

Resetting .......

System Bootstrap, Version 12.2(50r)SYS2, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2011 by cisco Systems, Inc.

PYRAMID platform with 2097152 Kbytes of main memory

Autoboot: failed, BOOT string is empty

Autoboot executing command: "boot "

bootdisk:%s72044-atafslib-m: Digitally Signed Release Software with key version A

Initializing ATA monitor library...

string is bootdisk:s2t54-adventerprisek9_npe-mz.SPA.150-1.SY.bin

bootdisk:%s72044-atafslib-m: Digitally Signed Release Software with key version A

Initializing ATA monitor library...

bootdisk:s2t54-adventerprisek9_npe-mz.SPA.150-1.SY.bin: Digitally Signed Release Software with key version A

Self extracting the image... [OK]

Self decompressing the image : ###################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]

          

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C6506-E (M8572) processor (revision ) with 1769472K/262144K bytes of memory.

Processor board ID SAL16074ER8

CPU: MPC8572_E, Version: 2.2, (0x80E80022)

CORE: E500, Version: 3.0, (0x80210030)

CPU:1500MHz, CCB:600MHz, DDR:600MHz

L1:    D-cache 32 kB enabled

        I-cache 32 kB enabled

Last reset from s/w reset

1 Virtual Ethernet interface

30 Gigabit Ethernet interfaces

36 Ten Gigabit Ethernet interfaces

2543K bytes of non-volatile configuration memory.

CONSOLE DOES NOT GIVE ANY THING FROM THIS POINTS ONWARDS

******* WHEN WE BOOT FROM ROMMON MODE, IT WILL GIVE FEW MORE LINES,NOTHING AFTER ************

rommon 5 > dir disk0:

disk0:%s72044-atafslib-m: Digitally Signed Release Software with key version A

Initializing ATA monitor library...

Directory of disk0:

3      69552532  -rw-     s2t54-adventerprisek9-mz.SPA.122-50.SY.bin

rommon 6 > boot disk0:s2t54-adventerprisek9-mz.SPA.122-50.SY.bin

disk0:%s72044-atafslib-m: Digitally Signed Release Software with key version A

Initializing ATA monitor library...

disk0:s2t54-adventerprisek9-mz.SPA.122-50.SY.bin: Digitally Signed Release Software with key version A

Self extracting the image... [OK]

Self decompressing the image : ##################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]

           

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C6506-E (M8572) processor (revision ) with 1769472K/262144K bytes of memory.

Processor board ID SAL16074ER8

CPU: MPC8572_E, Version: 2.2, (0x80E80022)

CORE: E500, Version: 3.0, (0x80210030)

CPU:1500MHz, CCB:600MHz, DDR:600MHz

L1:    D-cache 32 kB enabled

        I-cache 32 kB enabled

Last reset from s/w reset

1 Virtual Ethernet interface

27 Gigabit Ethernet interfaces

34 Ten Gigabit Ethernet interfaces

2543K bytes of non-volatile configuration memory.

WARNING: "ip multicast-routing" is not configured,

           IP Multicast packets will not be forwarded

collect ipv4 version

              ^

% Invalid input detected at '^' marker.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Cisco Employee

Sup2T is not booting after deleting vlan.dat file

Hello,

It seems that the console becomes stuck after the Sup starts to load the configuration file (assuming from the fact that the switch complains about the lack of "ip multicast-routing" command which confirms that the startup-config is being processed). Can you set your configuration register to 0x2142 in the ROMMON and try booting this way? This should prevent the switch from loading the configuration file that perhaps has some troubles starting.

Best regards,

Peter

View solution in original post

2 REPLIES 2
Hall of Fame Cisco Employee

Sup2T is not booting after deleting vlan.dat file

Hello,

It seems that the console becomes stuck after the Sup starts to load the configuration file (assuming from the fact that the switch complains about the lack of "ip multicast-routing" command which confirms that the startup-config is being processed). Can you set your configuration register to 0x2142 in the ROMMON and try booting this way? This should prevent the switch from loading the configuration file that perhaps has some troubles starting.

Best regards,

Peter

View solution in original post

VIP Mentor

Sup2T is not booting after deleting vlan.dat file

Hi Peter,

Thanks for the suggestion, yes it worked indeed.

Once bypass the NVRAM, we have deleted the corrupted startup config & apply config from fresh.

Regards

Rasika

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards