Dear Team,
We have an issue to log in(though we type correct credentials it doesn’t log in) using Cisco Network Assistant for the model Cisco 2960-S Series POE.
Some of the community support says this model is not supported for cisco network assistance, hence kindly revert back with appropriate answer.
Router Details:
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 6C:99:89:23:F1:80
Motherboard assembly number : 73-11908-09
Power supply part number : 341-0393-02
Motherboard serial number : FOC17500WNM
Power supply serial number : LIT174400XW
Model revision number : H0
Motherboard revision number : A0
Model number : WS-C2960S-24PS-L
Daughterboard assembly number : 73-11933-04
Daughterboard serial number : FOC17493F2N
System serial number : FOC1750W4ZE
Top Assembly Part Number : 800-30945-04
Top Assembly Revision Number : C0
Version ID : V04
CLEI Code Number : COMGE00ARD
Daughterboard revision number : A0
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 28 WS-C2960S-24PS-L 12.2(55)SE7 C2960S-UNIVERSALK9-M
