T3 Controller details

[shrikant4u]

Networkers/Guru's

Can any one please help me to understand difference/ significance of these two commands?

Router:  Cisco 7200

Card :    Enhanced 1 port T3 multichannel Port adapter, 1 port  /   PA-MC-T3-EC

04-B#sho controllers t3 6/0:28 tabular
T3 6/0 is up.

  T1 28 is up
  timeslots: 1-6,8,10-24
  FDL per AT&T 54016 spec.
  No alarms detected.
  Framing is ESF, Clock Source is Internal
  INTERVAL      LCV   PCV   CSS  SELS   LES    DM    ES   BES   SES   UAS    SS
  10:57-11:02     0     0     0     0     0     0     0     0     0     0     0
  10:42-10:57     0     0     0     0     0     0     0     0     0     0     0
  10:27-10:42     0     0     0     0     0     0     0     0     0     0     0

04-B#sho controllers t3 6/0:28 remote performance tab
T3 6/0 is up.

  T1 28 - Remote Performance Data
  INTERVAL      LCV   PCV   CSS  SELS   LES    DM    ES   BES   SES   UAS    SS
  10:59-11:03     0     0     7     0     0     0     7     0     0     0
  10:44-10:59     0     0    27     0     0     0    27     0     0     0
  10:29-10:44     0     0    28     0     0     0    28     0     0     0

We have Channelised T3 of which 1 T1 channel (chann 28)  is broken up further for Frac T1 (256k) circuits.  One of those Frac T1  circuit  is having issues.Telco keeps insisting nothing wrong on there network.

[paolo bevilacqua]

Take show controllers T1, show interface on the router that have issues.

[shrikant4u]

I'm not able to get serial int view in tabular form

04-B#sho controllers serial 6/0/28:9
Serial6/0/28:9
Hardware versions:
firmware version: 0x01070000
iofpga version: 0x00010002
freedm version: 0x00000000
temux version: 0x00020003
subrate fpga version: 0x00010004
liu version: 0x00000000
Rommon version: 0x00020000
rx_int_count 1523448654, tx_int_count 287049240
pak_move_failed 0 rx_idb_null_count 0
tx_count 0, output_qcount 0
xoff_word 0x387E0068, actual word 0xF57D7775,
bitword_mask_hi 0xC ,bitword_mask_lo 0x3
rtn_code_hi 0x0, rv_hi 0x4
rtn_code_lo 0x0, rv_lo 0x1
XOFFHI R=0 V=0
XOFFLO R=0 V=0
bytes_in_tx_lo  44, bytes_threshold_lo 1920
bytes_in_tx_hi  514, bytes_threshold_hi 1920
unmatched_anyphy 0 noshim 0

interface Serial6/0/28:9 is not master_link

fs_safe_start_fail 0 fs_safe_start_pass 0
Max Output enqueued 194, queue_drops 21407
safe_str_tail 101, safe_str_head 101
fastsend is 0x381D14, safestart is 0x383558
oqueue 0x16D025C, oqueue_dequeue 0x16D1288
write_addr 0xE5710000
rx_dma_bd_index_addr 0x38376240, rxr 0xE5704000, rxr_shadow 0x8F45AF0
present valid buffer pointer is 0x418138, in shadow 0x38814100
Tx interrupt 0x383624
ci_table 0x906E484
ctx 0x85AC0B8
oir_on_wait:FALSE no_intfs_reset:0x00000000
Autodnr Lock fail 0 Autodnr Process Failures 0
shadow_tx_status 0x387E0064 Active VCs/Port I port 24 II port 0
IPC stats for slot 6
0x867D8A4: ipc_rx_pkt_drops 0, ipc_tx_pkt_drops 0
pa_ipc_restart_cnt 0, pa_ipc_keep_restart 0

No Keepalive 0 ECC Single bit errors 0
oqueue_interleave_dequeue 0x16D18A0, QOS classify 0x16D0064

[paolo bevilacqua]

Do you want to solve the problem, or go after the way the output is displayed ?

[shrikant4u]

Paolo  ...sorry about that

Config for controller  and show interface on both side  is attached.