01-29-2015 10:28 AM - edited 03-05-2019 12:41 AM
Hi
I have a T3 Module installed on Cisco router 3845, I see that there is no loopback configured but the LP LED is YELLOW
Any idea why it's not GREEN?
Sou
Solved! Go to Solution.
01-29-2015 09:36 PM
Hi Soufiane,
Below table may answer you query.
Table 3. LED Port Indicators and Status
Link : http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/2600-3600-3700-series-t3-e3-network-module/product_data_sheet09186a008010fba2.html
Above link for T3 Datasheet providing detail explanation.
HTH,
Nikhil
01-29-2015 09:36 PM
Hi Soufiane,
Below table may answer you query.
Table 3. LED Port Indicators and Status
Link : http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/2600-3600-3700-series-t3-e3-network-module/product_data_sheet09186a008010fba2.html
Above link for T3 Datasheet providing detail explanation.
HTH,
Nikhil
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide