More info:
This is one of the routers in the path of the TE tunnel:
interface FastEthernet0/1
ip address 10.37.37.3 255.255.255.0
duplex auto
speed auto
mpls ip
mpls traffic-eng tunnels
ip rsvp bandwidth 50
end
This is the head end and path calculation:
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type dynamic (Basis for Setup, path weight 20)
Config Parameters:
Bandwidth: 128 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: enabled LockDown: disabled Loadshare: 128 bw-based
auto-bw: disabled
RSVP Signalling Info:
Src 10.10.10.10, Dst 3.3.3.3, Tun_Id 1, Tun_Instance 85
RSVP Path Info:
My Address: 10.107.107.10
Explicit Route: 10.107.107.7 10.37.37.7 10.37.37.3 3.3.3.3
Record Route: NONE
I don't understand how it's choosing the path if it doesn't meet the bandwidth requirements.
HTH,
John
*** Please rate all useful posts ***