cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
425
Views
0
Helpful
1
Replies

Traffic-Shape

KelvCast24
Level 1
Level 1

I am trying to configure traffic-shaping on an interface output but the command is not in the CLI? I used the feature search and the platform model along with IOS is supported for Generic Traffic Shaping. Is there a pre-requisite on enabling this feature on the interface-config mode?

Router in use 3945e

Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.2(1)T1                  

1 Reply 1

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

Don't quote me, but I thought I came across GTS may have been eliminated in some 15.x.

An alternative would be to use CBWFQ shaping.