Hi
I have 1941 .i have removed transport input all command and configure transport input none
My router rebooted and after that transport input all reappear in the config.below is existing line config and Please advise
RAK-ICELAND-ATM uptime is 13 hours, 29 minutes
System returned to ROM by power-on
System restarted at 22:09:49 GMT Sun Sep 28 2014
System image file is "flash0:c1900-universalk9-mz.SPA.151-4.M2.bin"
Last reload type: Normal Reload\
!
line con 0
exec-timeout 15 0
password 7 <removed>
authorization commands 1 net-supp
authorization commands 15 net-supp
authorization exec net-supp
accounting commands 1 net-supp
accounting commands 15 net-supp
accounting exec net-supp
login authentication con
transport output none
line aux 0
no exec
transport output none
line 2
no activation-character
no exec
transport preferred none
transport output none
stopbits 1
line vty 0 4
access-class ACCESS in
exec-timeout 15 0
password 7 <removed>
authorization commands 1 net-supp
authorization commands 15 net-supp
authorization exec net-supp
accounting connection net-supp
accounting commands 1 net-supp
accounting commands 15 net-supp
accounting exec net-supp
login authentication vty
transport input all
transport output none
line vty 5 15
access-class ACCESS in
exec-timeout 15 0
authorization commands 1 net-supp
authorization commands 15 net-supp
accounting connection net-supp
accounting commands 1 net-supp
accounting commands 15 net-supp
accounting exec net-supp
login authentication vty
transport input all
transport output none
!
