04-07-2008 03:41 AM - edited 03-03-2019 09:26 PM
I have two cisco router connected to each other by E1 connection ,also I implement a VPN between them (VPN over E1),one of these routers is connected also to the internet but when I tried to reach internet from the other router I could not>>I did a trace route from the router that is not connected to internet to real IP address but i could not reach(the default route on this router is toward the router connected to internet)
Any help??
04-07-2008 05:23 AM
You may have to post your config.
The NAT statement [if required] on the Internet facing router should include the source space behind the other router.
The VPN is for the inter-site communication or for all traffic?
Thanks.
04-07-2008 02:47 PM
forget about nating..trace route to real IP from the router that is not connected to internet was not successful????what you suggest
04-09-2008 07:09 PM
What does the traceroute show you, does the path try to go via the tunnel or via a default route?
04-09-2008 10:30 PM
the default route is through VPN Tunnel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide