I am preparing two lab exercises on the LISP protocol. The network diagram is as follows:
Lab 1:
10.10.0/24 10.20.0.0/24
(172.16.10.0/24)PC1----R2---------R1-------R3-----PC3(172.16.20.0/24)
MS/MR
Lab 2:
(172.16.10.0/24)PC1--(V10)-S1--R2------R1-------R3--S2-V10-PC3(172.16.10.0/24)
(172.16.20.0/24)PC2--(V20)| |-V20-PC4(172.16.20.0/24)
The three routers, R1, R2, and R3, are CSR1000v (NX-IOS 17).
R1-> loopback1 : 1.1.1.1/32
R2-> loopback2 : 2.2.2.2/32
R3-> loopback3 : 3.3.3.3/32
Please provide the commands to configure the three routers. I have tried several times without success.
