cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1015
Views
0
Helpful
10
Replies

Vlan,Vtp,VLSM about installation inform

Sefa On
Beginner
Beginner

     hello dear all,

i am writing from Istanbul, i am rellay need to your help, my mind so mixed right now. i have projecet network inst.

we have this equpmints

1.Asa 5505

1.3750

2 2960 switchs

i want to subnetting on this projecet you can details on following

I have 1 netwok range from 10.1.1.0 to 10.1.1.255 but 4 other subnet

10.1.1.0 / 27 ( for network device, switch, firewall, wi-fi and etc. )

10.1.1.32 / 27 ( for server, storage and etc. )

10.1.1.64 /26 ( for IPT ip phone )

10.1.1.128 /25 ( for clinet, printer, 3party and etc. )

what can i do ? how should i do conf on my device ? i can't run that procejt this configuration you can see the attectment on configuration file.

please help me about them.

i am waiting a good news.

best wishes from istanbul

10 Replies 10

Majed Saeed
Beginner
Beginner

Hi Sefa ,

Please clarify more what do you mean by :

what can i do ? how should i do conf on my device ? i can't run that procejt this configuration you can see the attectment on configuration file.

It is an easy setup as you proposed in the attachment . Moreover need to configure routing for the VLANs to be communicated with each other .

Regards ,

thanks a lot for your feedback Majed,

so how i can confugure routing for the vlans on 3750 ? or which one commens ? i am so sorry about them,

i am a new stundent on cisco its means i dont have any idea about them, then i have a new job and new project, i need to fihinish work.

can you help me about this conf ?

Dear Sefa,

i found your attached file for Diagram,its simply good,

do the Nat/PAT configuration in Firewall, with WAN IP address

assign one vlan for management , 10.0.2.0 /24

like for fireall inside, : 10.0.2.1

for Core                  :  10.0.2.2

for all A/switches     :   10.0.2.3

create vlan designs as per switches/ building /services then

VLAN Design like:

vlan 10 management

vlan 11 for Wireless

vlan 12 server

vlan 13 voice

like this

your designing part

now come to configuration

Firewall

configure the firewall with the NAT/PAT service for WAN

then configure the ACL for filtering traffic in Firewall

Core Switch

configure the VLAN  L3 in Core switch

then Configure the default route to Firewall

A/Switch

After configuring basic configuration

configure the default route to Core Switch

Rate it,

Hi Sefa ,

This is depend of the routing protocol used between FW-LAN and between FW-WAN . If we suppose that FW faced interface has an OSPF then you should configure and OSPF too in your 3750 switch ..

R,

Majed

Sefa On
Beginner
Beginner

hello dear all,

really thanks a lot for your feedback and cooperation, but still its not working diffirent subnet right now they cannt see themselves hows entery commend on cisco3750 for routing then can i entery 3750's default-gateway  on 2960.

thats so mixed, i dont understand why doesnt working ? i need to fihinish work of tomm orrow.

do you have any e.g commends route or same projecet ?

best wishes

Dear Sefa,

its must work just copy the running files and send ,

Sefa On
Beginner
Beginner

hello dear hussain,

السلام عليكم

i have packet tracer fie if you want, i can sent to you, you can more details conf...

still it doenst work. i am waiting your check.. you can see all details on attechment file.

thanks a lot bro... 

try to attached it its unable to download,

so sorry that, i did it...b

Sefa On
Beginner
Beginner

hello dear all,

i wish you a nice week, and happy monday,

do you have anything about them, please somebody help me...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: