Hello everyone I have an ipsec VPN created, but in addition to this we need to let me do multicast between points of the VPN, for a system VideoConference someone can guide me how to do it?
Thanks for your help
Router 1 connected to source
version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname xxx
!
no logging buffered
!
no aaa new-model
!
crypto isakmp policy 10
hash md5
authentication pre-share
crypto isakmp key XXXX address 195.x.x.70
!
!
crypto ipsec transform-set setmenorca esp-des esp-md5-hmac
!
crypto map palma 10 ipsec-isakmp
set peer 195.XX.XX.70
set transform-set setmenorca
match address 100
!
ip cef
no ip domain lookup
ip multicast-routing
!
multilink bundle-name authenticated
username admin privilege 15 password 7 XXXXXXXXXXXXXX
!
interface Ethernet0
ip address 192.168.3.251 255.255.255.0
ip nat inside
ip virtual-reassembly
hold-queue 100 out
!
interface ATM0
no ip address
no ip route-cache cef
no ip route-cache
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
ip address 217.XXX.XXX.188 255.255.255.192
ip nat outside
ip virtual-reassembly
no ip route-cache
no snmp trap link-status
crypto map palma
pvc 8/32
encapsulation aal5snap
!
!
ip route 0.0.0.0 0.0.0.0 ATM0.1
!
no ip http server
no ip http secure-server
!
ip nat inside source route-map nonat interface ATM0.1 overload
!
access-list 100 permit ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 120 deny ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 120 permit ip 192.168.3.0 0.0.0.255 any
snmp-server community private RO
snmp-server enable traps tty
!
route-map nonat permit 10
match ip address 120
!
