04-29-2005 08:42 AM - edited 03-03-2019 09:25 AM
I am trying to change out our internet router from a 3640 to a 3845. When I recieved the router it was equipped with 4 VWIC-1MFT-T1 controller t1 interfaces. What I have in the 3640 are 4 WIC-DSU-T1 interfaces. I was told that the two are compatible and are configured the same. But when trying to configure them I am finding out that they seem to be totally different.
Am I missing something?
Here is a copy of the config in the 3640 with the WIC-DSU-T1 that I am just trying to duplicate.
interface Multilink1
description -=TWTC Circuit Bundle 58/HCGS/100411/TWCS A/B/C/D=-
ip address
no cdp enable
ppp multilink
multilink-group 1
!
interface Serial0/0
description -=TWTC Circuit 58/HCGS/100411/TWCS/A=-
bandwidth 1536
no ip address
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
service-module t1 timeslots 1-24
no cdp enable
ppp multilink
multilink-group 1
!
interface Serial0/1
description -=TWTC Circuit 58/HCGS/100411/TWCS/B=-
bandwidth 1536
no ip address
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
service-module t1 timeslots 1-24
no cdp enable
ppp multilink
multilink-group 1
!
interface Serial1/0
description -=TWTC Circuit 58/HCGS/100411/TWCS/C=-
no ip address
encapsulation ppp
no cdp enable
ppp multilink
multilink-group 1
interface Serial1/0
description -=TWTC Circuit 58/HCGS/100411/TWCS/C=-
no ip address
encapsulation ppp
no cdp enable
ppp multilink
multilink-group 1
Thanks for your help
Tom
04-29-2005 09:04 AM
VWICs appear as controllers unlike WIC-1DSU-T1s. With your four vwics, you will see a similar output.
Controller 1/0
Controller 1/1
Controller 2/0
Controller 2/1
A sample controller config should look like this
controller 1/0
no shut
framing esf
linecode b8zs
clock source line
channel-group 1 timeslots 1-24 speed 64
int s1/0:1
bandwidth 1536
description <>
encap ppp
ppp multilink
multilink group 1
05-02-2005 12:44 PM
Thank you for the help.
I did get to work. I think I programmed in the controller ds0-group timeslots rather than channel-group time slots.
Every thing seems to be ok
Thanks again
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide