cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1394
Views
0
Helpful
7
Replies

Why can't ping??

1 Accepted Solution

Accepted Solutions

It was solved by deleting the "ip redirect"

Even though 63.5 is not the IP being used, it is questionable why I redirected to 63.5...

View solution in original post

7 Replies 7

Hello,

 

which device corresponds to which text file output ? Where is network 172.17.12.0/24 configured ?

The 172.17.12.0 network is HQ.

I found out that the routing table of the 63.31 switch is weird.

Routing-table.png

192.168.63.5 is an IP that does not exist.

What should I do??

Hello,

 

it might help to have a diagram that shows all the devices in the entire path, that is, from 172.17.12.0/24 to 192.168.63.34...

The path is WAN.

Please see the config in 63.31.

The routing table points to 63.5, but there is no setting for routing.

ip route 192.168.0.0 0.0.255.255 10.244.16.65-> this route point to upper Router "edge router" not to SW.

Hello

Disable ip routing on the switches ( Busan-63.31-5F, Busan-63.33-3F, Busan-63.34-3F-2) and use default-gateways


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

It was solved by deleting the "ip redirect"

Even though 63.5 is not the IP being used, it is questionable why I redirected to 63.5...