09-01-2005 01:32 PM - edited 03-03-2019 10:24 AM
!
policy-map shape
class class1
banwidth 120
class class-default
fair-queue
!
interface serial 1/0:0
frame-relay traffic-shaping
interface serial 1/0:0.555
ip address .....
frame-relay class test555
frame-relay interface-dlci 555
!
map-class frame-relay test555
service-policy out shape
!
When trying to apply the policy-map shape under subinterface 1/0:0.555 i get this warning/error message
"I/f Serial1/0:0.555 DLCI 555 class class1 requested bandwidth 120 (kbps), available only 28 (kbps)"
why this ?!
This DLCI is configured at the F.R switch to have speed with 256kbps
Thanks in advance
09-01-2005 01:58 PM
You have already applied the service policy in the map-class which is again applied under the dlci. You dont need to apply the service policy again under the sub interface.
09-01-2005 11:46 PM
When i want to apply this service-policy either under the subinterface or under the DLCI this message appears
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide