WIC-2T @6/6.144Mbps 2651XM

[DSJONES10]

Has anyone tried running a WIC-2T in a 2651XM with no NM at 6/6.144Mbps?

Mine will not synchronise with the Telco "feed", however 8.192Mbps will "synch" allbeit "having trouble" managing the transfers.

[lgijssel]

The speed you want to use may not be supported. I am not 100% certain that this is wrong but appearently you are working on the edge of what is possible. Found the following URL about WIC-2T:

http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800b0858.shtml#features

Please look under features to see if the additional info matches your situation.

Regards,

Leo

[DSJONES10]

Hi Leo,

thanks for your response,yes I had already seen and read the page in question.

It appears 4Mbps and 8 Mbps are supported but 6Mbps is not, and therein appears a pattern...

Cheers

[lgijssel]

I find it not very clear either. As I read it, 8Mb is only supported on a 2691 under the stated conditions, 4Mb max on other models, appearently including XM routers. That is, APPEARENTLY.

If I find anything more specific, I will let you know.

Regards,

Leo