hello , we have ASR9006 , and we used bundle-ether for 12 member interface
i have many user's in the bundle-ether as subinterface and i have apply Qos for limitation bandwidth , and using PRTG for monitoring ,
our problem is , the traffic graph in PRTG show as zigzag traffic for VLAN senor traffic and QOS
Bundle-Ether1
Status: Up
Local links <active/standby/configured>: 16 / 0 / 16
Local bandwidth <effective/available>: 160000000 (160000000) kbps
MAC address (source): e8ed.f341.dba4 (Chassis pool)
Inter-chassis link: No
Minimum active links / bandwidth: 1 / 1 kbps
Maximum active links: 64
Wait while timer: 2000 ms
Load balancing:
Link order signaling: Not configured
Hash type: Default
Locality threshold: None
LACP: Not operational
Flap suppression timer: Off
Cisco extensions: Disabled
Non-revertive: Disabled
mLACP: Not configured
IPv4 BFD: Not configured
IPv6 BFD: Not configured
interface Bundle-Ether1.9 description Cust-1 service-policy output CUST ipv4 address 185.89.98.1 255.255.255.0 encapsulation dot1q 9 ! policy-map CUST class class-default police rate 20000 mbps ! end-policy-map !
----------------------------------------------------------------------------- 0/RSP0/CPU0 A9K-RSP440-SE(Active) IOS XR RUN PWR,NSHUT,MON 0/RSP1/CPU0 A9K-RSP440-SE(Standby) IOS XR RUN PWR,NSHUT,MON 0/3/CPU0 A9K-36x10GE-TR IOS XR RUN PWR,NSHUT,MON
