02-18-2024 01:14 AM
Hi.
I would like to know if vEdge 1000 support bidirectional packet capture in SDWAN Manager. vEdge is running version 20.3.7.1 while 20.9.4.1 for all controllers and SDWAN manager. Thank you
Azlan
Solved! Go to Solution.
02-19-2024 05:08 AM
Whatever I shared is "Packet Trace" tool which can show path-trace (what and where happening) with copy packet availability.
Whatever you shared is " Embedded Packet Capture" tool which captures packets at some points of flow with respect to device where you do capture.
For Packet Trace, bidirectional support is available from 17.8/20.8 (cEdge/vEdge).
For EPC, bidirectional support is available from 17.7 (cEdge only). For vEdge I don't see that support even with latest releases, just as feature it is supported from 20.6 releases.
02-18-2024 02:07 AM
Hi,
it is from 17.8/20.8. Since your router has lower release, it will not be possible:
02-18-2024 07:44 AM - edited 02-18-2024 07:46 AM
Hi Kanan,
Thank you for your response and clarification. Can i say that packet "capture" is based on packet "tracer" feature?
Bidirectional Packet Capture for Cisco IOS XE Catalyst SD-WAN Devices | Cisco IOS XE Catalyst SD-WAN Release 17.7.1a Cisco vManage Release 20.7.1 | This feature enhances the embedded packet capture functionality to support bidirectional packet capture through Cisco SD-WAN Manager. |
Thank you.
02-19-2024 05:08 AM
Whatever I shared is "Packet Trace" tool which can show path-trace (what and where happening) with copy packet availability.
Whatever you shared is " Embedded Packet Capture" tool which captures packets at some points of flow with respect to device where you do capture.
For Packet Trace, bidirectional support is available from 17.8/20.8 (cEdge/vEdge).
For EPC, bidirectional support is available from 17.7 (cEdge only). For vEdge I don't see that support even with latest releases, just as feature it is supported from 20.6 releases.
02-20-2024 08:09 PM
Hi Kanan,
I really appreciate the explanation. That implies that the only option left to me is to switch from vEdge to cEdge hardware in order to enable the EPC bidirectional packet capture feature.
Once again, thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide