cEdge( sdwan) 1161p- Port forwarding range

jgauchan · ‎05-16-2024

Hi,

Am new to SDWAN and am trying to configure port forwading on our SDWAN- We have 10 Isr 1061 running IOS-XE.( Vedge, you have range, no issue)

I can't find any way to add range, I would do manually but the ports are in hundreds and there should be a better way of doing it.

We have Phone PBX that needs following port forwading

eg

Please see below for port forward numbers;

Point these to UCP IP Address: 192.168.1.XXX

UDP 5060 – 5060

UDP 6254 – 6254

UDP 7000 – 7015

UDP 7100 – 7115

UDP 7300 – 7315

UDP 10000 – 10239

UDP 5588 – 5588

TCP 8899 – 8899

TCP 7878 – 7878

Point the below to VOIM/VCIM IP Address: 192.168.1.XXX

UDP 6000 – 6047

UDP 8000 – 8047

UDP 9000 – 9047

UDP 20000 - 20639

UDP 20640 – 20895

Please help me- Can't deploy SDWAN without this as This site will be HQ and Hub.

Thank you in advance.

Just been told by Cisco support team that there is no option to do this- Strange

I have to manually add this in router using cli template.