02-24-2023 03:58 AM
How do you introduce an external network into your sdwan that does not have a viptela router ie Can also access the bearer in the underlay. I can PING the connected Edge routers from this device but no further into the mesh.
Maybe OMP/Advertise Static on the connected Edges?
Solved! Go to Solution.
05-21-2023 02:35 AM
You can't connect an external network to Viptela unless it is a service side connection. This means that it needs to be configured in a VPN (or VRF) other than 1. All networks that want to join the SD-WAN need a Viptela Edge node which can participate in the mesh.
02-24-2023 06:35 AM
02-24-2023 06:21 PM
Hi Lei, thanks for your reply.
Maybe I can give you a bit more perspective as I'm sure it's hard to know exactly what I am trying to achieve.
I'll attach a quick diagram for you to view, but I have two Vedge nodes connected on the transport side and each have a service side PC. PCs can ping each other over their OMP tunnel. Also connected to this bearer is an external (to the SDWAN system) PC. This PC can ping each end vEdge WAN interface but I want it to be able to pop into the SDWAN system and communicate to one of the service side PCs. The SDWAN system should be able to act as a relay for this external node. ie It's in the middle of each LAN node.
05-21-2023 02:35 AM
You can't connect an external network to Viptela unless it is a service side connection. This means that it needs to be configured in a VPN (or VRF) other than 1. All networks that want to join the SD-WAN need a Viptela Edge node which can participate in the mesh.
05-21-2023 02:20 PM
Hi,
leaking between global and service side would work in your case too.
05-21-2023 02:48 PM
Hi,
I believe it is doable...if I understand this correct. You may use either route-leaking (between VPN and Global/VPN0) or maybe IPSec.
Other than that, you will have to do some funky connectivity footwork by connecting service VPN to transport VPN (by some means) as well, but this is getting hairy and should be avoided.
Anything is possible
Just depends
Have fun
Ciao
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide