TLDR; I have a static route in a service VPN with a vpn 0 gateway. OMP is set to advertise static routes but does not seem to advertise this route.
vpn 3001
ip route 0.0.0.0/0 vpn 0
omp
advertise connected
advertise static
sh ip route vpn 3001
PROTOCOL NEXTHOP NEXTHOP NEXTHOP
VPN PREFIX PROTOCOL SUB TYPE IF NAME ADDR VPN TLOC IP COLOR ENCAP STATUS
---------------------------------------------------------------------------------------------------------------------------------------------
3001 0.0.0.0/0 nat - ge0/5 - 0 - - - F,S
Background: This configuration works for routing local traffic in vpn 3001 direct to the internet. Currently, most sites do not have internet connectivity, only connectivity to MPLS. The goal here is to allow sites without direct internet connectivity to route guest traffic (vpn 3001) to this site where it will be directed to the internet. The internet interface uses NAT so that will facilitate the return traffic.
I've also tried adding "advertise network 0.0.0.0/0" and "advertise aggregate 0.0.0.0/0" aggregate-only" but both seem to do nothing.
Thanks in advance
