Hello,
An organization wishes to to track monthly usage of 4G LTE interfaces on an ISR. When that amount of traffic is exceeded within a monthly period, traffic sould reroute from the cellular interface (by automatically “shutting” the cell interface).
I used the script below
https://community.cisco.com/t5/networking-knowledge-base/monitor-the-byte-count-over-4g-cellular-interface-s/ta-p/3144685
I created the CLI template and used the following commands;
event manager environment _DOM 1
event manager environment _bytes_warning 80
event manager environment pri_intf Cellular0/2/0
event manager environment _bytes_allowed 2000000
event manager directory user policy "flash:/"
event manager directory user policy byte_counter.tcl
event manager policy byte_counter.tcl type user
Last command is rejected by the router. It seems this command is not supported by sd-wan image. So script do not become active.
Is there a way to use this script in SD-WAN sofware ?
Thanks for all your help