02-21-2021 03:44 AM - edited 02-21-2021 04:36 AM
Hello All,
Is SD-WAN speed test supported on ISR 4331 and C1111?
To enable speed test (data stream from settings), is it must to add the vManage IP (either vpn 0 or 512) or do we have other options?
Thanks
Solved! Go to Solution.
02-22-2021 09:32 AM
it is not supported on cEdges, it is only natively supported on vEdges as they run IPerf in the vshell.
03-06-2021 07:25 AM
Hello All,
Just to keep this post updated with the latest, with the help of someone from Cisco found that speed test will be supported on 17.2.x for Cisco IOS XE SD-WAN devices.
This is the release notes: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/release/notes/xe-17-2/ios-xe-sd-wan-re-notes-17-2.html
Thanks
02-22-2021 09:32 AM
it is not supported on cEdges, it is only natively supported on vEdges as they run IPerf in the vshell.
02-24-2021 12:39 AM
Thanks Oscar
03-06-2021 07:25 AM
Hello All,
Just to keep this post updated with the latest, with the help of someone from Cisco found that speed test will be supported on 17.2.x for Cisco IOS XE SD-WAN devices.
This is the release notes: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/release/notes/xe-17-2/ios-xe-sd-wan-re-notes-17-2.html
Thanks
03-08-2021 01:31 PM
The below article may help you to test the speed via CLI
https://www.thenetworkdna.com/2021/02/cisco-viptela-sdwan-speed-test-via.html
Regards
Inderdeep Singh
03-11-2021 03:10 AM
Thanks for the information
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide