Customer has a hub and spoke Viptela network. Hub sites have 2 transports, mpls and lte. Customer wants to prefer the mpls color to egress out all traffic, unless the remote site only has an lte connection. If remote site only has an lte connection then hub should use its lte color for traffic egress.
What's the simplest way to do this? Looking at the "encapsulation ipsec preference..." command under the transport interface configs. Also looking at a centralized traffic engineering data policy that states "for all destination prefixes use the mpls local tloc".
Looking for any guidance on the best method, or some other alternative.
Thanks
