Hi, I are currently facing an issue with an Cisco 1100 SD-WAN (Viptela) router at a template level. I tried pushing down a template and it is currently throwing out an error. The device template is 'Out-of-Sync'. The device is reachable and up an ru...
Forum Posts
Hello,I asking about the process in SD-WAN multitenant solution and how it can be done with a cisco automated certificate with the PNP portal.Also is it require a main smart account, not a virtual account when deploy at the provider level, not at the...
HI Experts.I know the threshold value can be between 1% and 5% packet loss. Do you know whether the Cisco SDWAN FEC Loss threshold is for line packet loss or TCP packet loss?FEC Adaptive—Only send Forward Error Correction (FEC) information when the ...
Resolved! OMP stops advertising all routes
We recently tried to update a centralized data-policy applied to a VPN 1 only The policy change worked, but there was a side affect where all OMP routes in VPN 500 stopped. Our updated data-policy policy does not refer to VPN 500 so we were confused ...
i am trying to bring ospf between two GRE tunnels and after pushing the configuration from the Vmanage i obtained the below log*Nov 29 07:02:00.358: OSPF PAK Tu100512: Drop packet, OSPF not enabled on interfaceso the question is how to enable ospf on...
Hi Guys I m using Windows Server 2016 as NTP for my SD-WAN Controllers but getting the below, any help SD-WAN
Hi Guys I m using Windows Server 2016 as NTP for my SD-WAN Controllers but getting the below, any help SD-WAN
Hi team,I have created SDWAN lab in EVE PRO. vEDGEs are successfully come up. But when I want to bringup CSR1000v image, vManage GUI shows that "CSR FAILED" (this CSR means certificate signing request). What I see is CSR1k connects to vbond , learns ...
Resolved! Why vBond still send hello packets?
hi guys, i'm new to sd-wan and there is a trouble with my study I know once vEdge onboarding at vSmart,vManage, the connection will be lose with vBond. but when I check my control connection. there is a vBond with system ip 0.0.0.0 also the hello ...
Dear All,I would like to ask that when i run show sdwan omp route command on my spoke, i see many invalid unresolved routes because there is no BFD session over that colour is there any way to hide these invalid Routes?Second Question is that i hav...
Hi community,I am implementing the Cisco SD-WAN TLS proxy but cannot understand the difference between the two Proxy actions - "pass-through" vs. "do-not-decrypt." According to the documentation, "pass-trough" means the ClientHello message passes thr...
Hi,We're running local DHCP server feature with multiple subnets on our operating vEdges.Basically, subnets are divided into data or voice.We see voip phones receive data subnet, not voice subnet from the local dhcp server on vEdge.We set voice vlan...
Hi, I am trying to interlock my SD-WAN device with PRTG.I tried to interlock using SNMP, but entering MIB doesn't work. If you have any information like the setup guide or manuals, please share it.Any help/comment is appreciated. Please help!
Hello, We have been plagued for some time now with what seems like random occurrences with full dataplane loss on our cEdge devices. All of these devices have MPLS connections as well as Broadband connections as primary transports with LTE configured...
Hello Everyone, Greetings for the day !!Can someone please guide me by providing the valuable suggestions for the below: How to become an expertise in Cisco ACI and SD-wan? Currently I am at the Intermediate level. Thank You.
