Speed Test in vManage

[Hitchens-22]

Hello All, 

We're not able to run speed test in vManage on any of our vEdges, we get error "Device Error: Server unreachable". It never worked.

We're running 18.3 on vSmarts and 17.2.8 on vEdges. I read somewhere that we need to have 18.3 on both ends in order to run speed tests. I haven't found any Cisco documentation on minimum firmware requirements to run speed tests in vManage.  I would greatly appreciate if someone could confirm if speed test is not supported on vEdges with firmware 17.2.8. 

Thank you, 

Hitch. 

[daniel.dib]

Speed test was added in 18.2.

https://sdwan-docs.cisco.com/Product_Documentation/Getting_Started/Release_Notes/02Release_Notes_for_Release_18.2

Note though that you can run iPerf from the CLI. That is basically what speed test does but it does so from the GUI.

[ekhabaro]

This document should be helpful to troubleshoot such errors: https://www.cisco.com/c/en/us/support/docs/routers/sd-wan/214662-data-stream-troubleshooting-tools-faq.html