Where to configure IOS-XE "ip nat service ftp" (FTP ALG) in vmanage?

[Roman Rodichev]

When doing show run on 17.2 IOS-XE vmanage controlled ISR 4300, you can see that NAT ALG is disabled for all protocols, including FTP. For example, ACTIVE FTP needs this to be enabled. For the life of me, I can't find any documentation or any template in vmanage that let's you change it. How do you change it?

[Kanan Huseynli]

Hi,

most commands can be done via template, some others can be configured via "CLI-template", but looks like "ip nat service" can't be configured on SD-WAN routers.

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/command/iosxe/qualified-cli-command-reference-guide/m-appendix.html

You may try to configure, may be will be supported even though is not listed in document.

HTH,