08-28-2017 07:57 AM
Can we use UDP Director (AKA FlowReplicator) to receive and broadcast RADIUS packets to several destinations? Couldn't find a list of supported protocols in any document provided by Lancope or Cisco.
Solved! Go to Solution.
08-28-2017 08:07 AM
I can see where you'd want to send 1813/udp and maybe 1646/udp to track RADIUS accounting messages, and yes - that would work through a UDP Director. You'd just need to set up the appropriate forwarding rules.
I'm not so sure that you'd want to set up 1812/udp and 1645/udp to forward RADIUS authentication to multiple servers. I could see where that potentially could cause issues as multiple devices respond to authentication requests.
08-28-2017 08:07 AM
I can see where you'd want to send 1813/udp and maybe 1646/udp to track RADIUS accounting messages, and yes - that would work through a UDP Director. You'd just need to set up the appropriate forwarding rules.
I'm not so sure that you'd want to set up 1812/udp and 1645/udp to forward RADIUS authentication to multiple servers. I could see where that potentially could cause issues as multiple devices respond to authentication requests.
08-28-2017 08:19 AM
Thanks for the reply David! I will clarify the needs with the customer and follow up on that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide