To participate in this event, please use the button to ask your questions
Here’s your chance to discuss more about the configuration, troubleshooting and best practices for Anyconnect secure mobility client on a Cisco Adaptive Security Appliances (ASA) and Firepower Threat Defense (FTD) and its integration with other Cisco security portfolio devices and technologies like ISE and Duo.
This session provides an opportunity to learn and ask questions about various aspects of Anyconnect implementation (using SSL and Ikev2) including (but not limited to) emergency licenses, configuration, deployment and troubleshooting Anyconnect that provides the security necessary to help ensure that your organization is safe and protected in such critical situation
Ask questions from Monday 6 to Friday, April 17, 2020
Dinesh Moudgil is a High Touch Technical Support (HTTS) Engineer with the Security team at Cisco. He has been working on Cisco technologies for more than 6 years focusing on Cisco Next Generation Firewalls, Intrusion Prevention Systems, Identity Management and Access Control (AAA) and VPNs. He holds a CCNP, CCDP and CCIE #58881 certifications, and multiple vendors certifications such as ACE, PCNSE and VCP.
Pulkit Saxena works as High Touch Technical Support (HTTS) Engineer in Security Domain with Cisco bring nearly 7 years of experience in the industry to the team. He has hands on experience with multiple firewalls, different VPN solutions, AAA and Next Generation IPS along with delivering multiple trainings. Pulkit holds certifications from multiple vendors, namely Cisco and Juniper, (CCIE Security and JNCIA).
Jason Grudier is the Technical leader on the VPN TAC team in Raleigh, NC. He has been working for Cisco on the VPN team for six years. Prior to joining the team, he was a network engineer at Labcorp. He works primarily with AnyConnect troubleshooting and configuration across all Cisco platforms as well as DMVPN, GETVPN, Radius, LDAP and Certificate authentications.
Gustavo Medina is a Systems Sales Engineer with the Enterprise Networking Sales team. He has more than 10 years of experience in security and enterprise networking. In his career he has focused on different tasks from technical escalations and partner adoption to the revision of Cisco Certification evaluations. Gustavo holds a CCNA, CCNP CCSI, and a CCIE in security (#51487).
Due to the anticipated volume for this high in-demand event, Dinesh, Pulkit, Jason and Gustavo might not be able to answer each question. Thus, remember that you can continue the conversation directly in the Security community.
Hello Cisco Community I got an Anyconnect VPN configured, users grab from a Pool of IPs to get theirs. My question will be is there a way to modify the time they stick on their Lease IP? So even if they logout for lets say 5 minutes, when they l...
Hello, Experts: The content is to do wireless 802.1x certification for WLC3504 in the wireless project, and build ISE220.127.116.116 to simulate customer environment test:Requirements: The authentication pol...
Dear all,Scenario:Rate Limit ingress traffic as a DoS protection for Customer Subnet´s ISP-------- gig0/0 ISR Router----Customer Subnet´s Router ISR 4300 Series IOS XE with gigabitethernet connection to ISP Router.Rate-limit ingress traffic to 2...
Hello,Need help with CN name not updated in Internal CA Certs issue.I have freshly installed Cisco ISE on 3615 hardware.No configuration is present on the box and I changed serial number of ISE and restarted the services.Updated serial number is visible e...
Hi all, We have a server which requires to go out on a specific interface "outside3". I tried to set it up so it will route to outside3 but somehome the traffic still go out at outside2. This is what I configure for that change:acces...