FirePOWER Threat Defense for Integrated Services Routers ( ISR ) (Live Webcast July 8, 2015 at 10:00 am Pacific Time / 1:00 pm Eastern Time)
Please join us on Wednesday, July 8th at 10 a.m. PDT San Francisco (UTC -7 hours) for this live, interactive event.
In October 2013 Cisco acquired Source Fire, an industry leader in the security solution space. Since the acquisition, Cisco has integrated Source Fire in the ASA platforms as well as in the ISR platforms.
In this session you will learn about Source Fire company history, the rebranding of Source Fire as FirePOWER Services and how to use FirePOWER effectively on the ISR G2 and 4K platforms on the UCS-E blade to secure the network from attacks and malware.
Kureli Sankar started with Cisco in Aug, 2006 as a TAC engineer in the firewall team in Research Triangle Park, North Carolina. As a TAC engineer she supported Cisco's security products. Since, May 6th 2013, she has taken up a new role as Technical Marketing Engineer, Enterprise Infrastructure and Solutions Group responsible for security features on Cisco's IOS and XE products.
She has presented at Cisco Live 2013 and 2014. She has also done quite a few Live Web Casts and ATE (Ask The Expert) events for our forum.
Prior to joining Cisco, Sankar worked for John Morrell Co., Cincinnati, Ohio where she was the network administrator in charge of the company's enterprise network covering 27 locations in the United States. She also was an adjunct professor at the University of Cincinnati, teaching undergraduate level networking courses. Sankar holds an engineering degree in Electrical and Electronics Engineering from Regional Engineering College, Trichirappalli, India, CCSP and CCIE Security #35505 certifications.While working full time, she volunteers at various organizations like Citizen School, Durham Performance Learning Center, NC First Robotics, Girl Scouts - Carolina, Raleigh Rescue Mission and gives back to the community
Hello We recently replaced an old juniper with a Cisco FTD device. One of the challenges we've faced seems like it should be doable and I'd like your input. We have two /30 internet connections from our provider that statically routes to a...
I am a Cisco Stealthwatch User with few UDP Directors. I am trying to import the XML file of the Forwarding Rules and looking to update all of the UDP Directors at once and within that script, i am also looking to sync the directors. I have been searching...
Hi,I am trying to create a ICL to allow only Incoming traffic to IP XX.XX.XX.XX port 80But it does not work. Extended IP access list Outside-Traffic40 permit tcp any host XX.XX.XX.XX eq www900 deny ip any anyClass Map type inspect match-any Inc...
Hi,I get the following error and im unable to install cisco anyconnect.It installs but on the end of the proccess the installer deletes all the programs intalled by cisco anyconnect. On the event vwr i have the following error: Product: Cisco AnyConn...