cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
23783
Views
80
Helpful
12
Comments
katmcnam
Cisco Employee
Cisco Employee

I took some time to import and update quite a bit of RADIUS vendor dictionaries for 3rd party vendors into ISE. I grabbed this information from various community and open source sites but I obviously can't test it against every vendor out there since I don't have  a selection of 140+ 3rd party NADs sitting in my lab. After I imported them to ISE, I exported them and have uploaded them here. 

 

Note: If any of these don't work or I need to update some of the attributes, please shoot me a PM and I'll make the necessary adjustments. Also if there are any vendors I should be adding, let me know.

 

 

 

 

 

 

Comments
yshchory
Cisco Employee
Cisco Employee

As usual, Katherine, you're a rockstar!!!

 

Thank you for this, working with the team to see if there's a way to get this into the product itself to enhance the experience, but until then - I'm sure that it will be easier for ISE users to use 3rd party NADs with these dictionaries!

 

Yuval

d.silcox
Level 1
Level 1

katmcnam,

 

Thank you for including the RuggedCom switch. However, I am having a hard time to use the ISE to authenticate the RuggedCom switch. The log in ISE is fine, but RuggedCom switch showed login failed. I have been using the ACS v5.4 for RuggedCom. I just started to use ISE 2.6. Any help would be appreciated. Thanks!

Rich R
VIP
VIP

Am I missing something here @katmcnam - I don't see a downloadable attachment?

bradjohnson
Cisco Employee
Cisco Employee

@Rich R Click each individual manufacturer. There isn't a single link to download all.

lex.jimenez
Level 1
Level 1

Any chance you could create a working dictionary for Ribbon/Sonus voice devices?

daniel.brooks
Level 1
Level 1

Is there one for NetScout Systems Inc? 

SalmanHKhan
Level 1
Level 1

Hi Katherine,

I tried to upload different files but I get the "Unable to read file - please ensure file is in XML format and extension." Please let me know what am I doing wrong here?

Screenshot 2023-11-03 at 3.06.24 PM.png

 

For Meraki, there are some more attributes:

 

VENDOR Meraki 29671
BEGIN-VENDOR Meraki
ATTRIBUTE Meraki-Device-Name 1 string BOTH
ATTRIBUTE Meraki-Network-Name 2 string BOTH
ATTRIBUTE Meraki-Ap-Name 3 string BOTH
ATTRIBUTE Meraki-Ap-Tags 4 string BOTH
END-VENDOR Meraki

 

And the ISE also misses some standard attributes defined in RFC7268:
https://cyber-fi.net/index.php/2022/08/17/tuning-the-cisco-ise-for-meraki-networks/
At least Meraki APs send them.

 

SalmanHKhan
Level 1
Level 1

Nevermind, I was uploading the file in the wrong place.

I cannot see the vendor-dictionaries for Ubiquiti UniFi any one can help?

Afzaal27
Level 1
Level 1

Any chance you could create a working dictionary for RAD Secflow and 4RF Devices?

 
sandesh-dhuri
Level 1
Level 1

Do we have network device profiles for Fortinet ?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: