Core issue
PIX/ASA is getting IP address, but traffic cannot pass outside of the PIX/ASA because of an incorrect default route.
Resolution
Verify that a default route is not configured in the PIX. If one exists, remove it. Use the setroute option at the end of the ip address command to have the PIX automatically set the default route using the default gateway parameter that the PPP over Ethernet (PPPoE) server returns.
Problem Type
Connectivity through the device
Troubleshoot software feature
Product Family
ASA Hardware & Software
Firewall - PIX 500 series
Frequency
Continuously
PIX Software Version
PIX version 6.3
PIX version 7.x
PIX version 6.2
ASA Software Version
7.2
7.0
7.1
PIX Model
PIX 500 Series Firewall
ASA Models
ASA 5500
ASA 5510
ASA 5520
ASA 5540
Features & Tasks
Point-to-Point Protocol over Ethernet (PPPoE)
Selected PIX or Router Commands
ip address
Can You Ping...
Client cannot ping outside router
