How i can config SNMP on Cisco Nexus 5K?

[jmp780718]

Hi,

Someone have a configuration guide to enable snmp over nexus 5k.

Thank you.

[richbarb]

Hello,

Keep in mind that SNMP is enabled by default on nexus plataform. What you can do is set username/password and roles for snmp v3, enable traps, community settings, etc.

This is the configuration guide:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5500/sw/system_management/6x/b_5500_System_Mgmt_Config_602N12_chapter_01110.html

[Maher Abdelshkour · Accepted solution]

To configure SNMP:

snmp-server contact noc@example.com

snmp-server location st. example, 7 - Padova

snmp-server host snmp1.example.com traps version 2c public

snmp-server host snmp1.example.com traps version 2c public

snmp-server enable traps config

snmp-server enable trap link

snmp-server enable trap callhome

snmp-server community public ro

snmp-server source-interface traps mgmt 0

[gsharma4]

Hi,

Please find the below link for configuration guide for Nexus 5K.

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/sm_snmp.html

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/system_management/513_n1_1/b_Cisco_n5k_system_mgmt_cg_rel_513_n1_1_chapter_01110.pdf

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_0_1a/sm_snmp.pdf

Regards,

Gaurav