Re: how to see which one is master in gigabit autonegotation ?
To set various operational parameters associated with the Gigabit Ethernet interface, such as the size of the maximum transfer unit (MTU) or the use of VLANs, use the interface ge? command. To disable the use of VLANs, use the no form of this command. To specify that auto negotiation will never be used on this interface, use theinterface ge? no autonegotiation command.
In this series of blogs, we are trying to discuss some of the unique advantages of Cisco MDS 9000 series switches across the Fibre Channel industry. In the first blog, we talked about NVMe/FC support in Cisco MDS 9000 Series Multilayer Switches....
Cisco Champion Radio · S7|E30 Taming Your AI/ ML Workloads with Kubeflow
As organizations increasingly introduce machine learning (ML) capabilities to their existing products, their artificial intelligence (AI) projects and operations complexity grows. A...
Cisco Data Center Networking Demo Series – Assurance and Insights
Live webinar: Cisco Data Center Networking Demo Series – Assurance and InsightsThursday, August 27, 202010:00 AM Pacific Standard Time (San Francisco, GTM -08:00)
With Cisco Data Cen...
The Future of Fast: Introducing Nexus 3550 Series and Nexus SmartNICs
Network Insider Live Webinar
Tuesday, August 25, 202010:00 am Pacific Time(San Francisco, GMT-08:00)
The Nexus 3550 Series and Nexus SmartNIC technology, formerly Exablaze...
Original Blog published @ https://blogs.cisco.com/datacenter/spinning-up-an-nvme-over-fibre-channel-strategy
Every so often there comes a time when we witness a major shift in the networking industry that fundamentally changes the landscap...