Just checked some of my lab 5548s which have N55-D160L3 installed for L3 , i dont see any feature for ip sla to be enabled
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ---------------------- ------------
1 32 O2 32X10GE/Modular Universal Platfo N5K-C5548UP-SUP active *
3 0 O2 Daughter Card with L3 ASIC N55-D160L3 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
--- -------------- ------ ----------------------------------------------------
1 7.0(6)N1(1) 1.0 --
3 7.0(6)N1(1) 1.0 --
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 547f.eed1.7708 to 547f.eed1.7727 FOC163550AG
3 0000.0000.0000 to 0000.0000.000f FOC16347AN2
06# sh feature | i sla
06# sh feature
Feature Name Instance State
-------------------- -------- --------
Flexlink 1 disabled
amt 1 disabled
bfd 1 enabled
bfd_app 1 enabled
bgp 1 disabled
bulkstat 1 disabled
cable-management 1 disabled
cts 1 disabled
dhcp 1 disabled
dot1x 1 disabled
eigrp 1 enabled
eigrp 2 enabled (not-running)
eigrp 3 enabled (not-running)
eigrp 4 enabled (not-running)
eth_port_sec 1 disabled
evmed 1 disabled
fabric-access 1 disabled
fabric_mcast 1 disabled
fcoe 1 disabled
fcoe-npv 1 disabled
fex 1 enabled
glbp 1 disabled
hsrp_engine 1 enabled
http-server 1 disabled
interface-vlan 1 enabled
isis 1 disabled
isis 2 disabled
isis 3 disabled
isis 4 disabled
lacp 1 enabled
ldap 1 disabled
lldp 1 enabled
msdp 1 disabled
nat 1 disabled
netflow 1 disabled
oim 1 disabled
onep 1 disabled
ospf 1 disabled
ospf 2 disabled
ospf 3 disabled
ospf 4 disabled
ospfv3 1 disabled
ospfv3 2 disabled
ospfv3 3 disabled
ospfv3 4 disabled
pbr 1 disabled
pim 1 disabled
pim6 1 disabled
poe 1 disabled
pong 1 disabled
private-vlan 1 disabled
privilege 1 disabled
ptp 1 disabled
rip 1 disabled
rip 2 disabled
rip 3 disabled
rip 4 disabled
scpServer 1 enabled
sftpServer 1 disabled
sshServer 1 enabled
tacacs 1 enabled
telnetServer 1 disabled
udld 1 enabled
vem 1 disabled
vnseg_vlan 1 disabled
vpc 1 enabled
vrrp 1 disabled
vtp 1 disabled
wccp 1 disabled
