NTP not working on N7k non admin VDC

[Steev112]

Hi All,

I have N7k with NX-OS 6.2 , and divided with one admin vdc and other 3 vdc's.

I have external NTP server  connected to non admin vdc "server VDC", I have configured NTP on admin and non admin VDCs, from admin VDC NTP it works fine but other vdcs not working, from other vdcs I can ping the NTP servers via loopback0  but when show ntp status I don't see anything and I tried to configure "clock protocol ntp vdc x" on the admin vdc but the same below the config:

ADMIN VDC:

ntp server 192.168.30.100  prefer use-vrf management
ntp server 192.168.30.101 use-vrf management
ntp source-interface  mgmt0

ntp logging

NON admin VDC

ntp server 192.168.30.100  prefer
ntp server 192.168.30.101
ntp source-interface  loopback 0

ntp logging

Any one have idea what is the problem.

Thanks

[Justin Welch]

Hello,

Please see the following link for additional information:

https://supportforums.cisco.com/discussion/11322751/ntp-problem-nexus-7000

http://jeffostermiller.blogspot.com/2011/09/nexus-7000-ntp-sourced-from-non-default.html

http://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/113585-nex7000-ntp-config.html

Hope this helps,

Justin

[Steev112]

Hi Justin,

Thanks for your reply, I have read it but can you tell me exactly what the configuration need to do it in admin vdc and non admin vdc to work?

Thanks

[Steev112]

Hello,

any one help me and post the right configuration on admin and non admin VDC

Thanks