How do you handle overlapping vlans when using OTV between Data Centers. i.e. in Data Center 1 i have vlan 100 with ip address 10.10.100.0/24 and in Data Center 2 I have vlan 100 with ip address 10.20.100.0/24. I don't want to combine these into one network but keep them seperate when extending them between Data Centers.. Can OTV re-assign the vlans? or do i have to ensure the vlan tags are unique between the data centers?
Then you need seperated OTV edge devices for each DC which has overlapped vlans. You can increase the number up to three at this moment by using VDC feature. OTV doesn't support qinq or similar mechanisms yet.
Evan with a separate VDC the only way I can think of to translate the vlans is too connect access ports for each vlan that needs to be translated. This is not a practical solution for a large number of vlans as it would use a large number of ports on the Nexus 7K. If a trunk is used the vlan tags are passed through. Is there another way?
Cisco Champion Radio · S7|E30 Taming Your AI/ ML Workloads with Kubeflow
As organizations increasingly introduce machine learning (ML) capabilities to their existing products, their artificial intelligence (AI) projects and operations complexity grows. A...
Cisco Data Center Networking Demo Series – Assurance and Insights
Live webinar: Cisco Data Center Networking Demo Series – Assurance and InsightsThursday, August 27, 202010:00 AM Pacific Standard Time (San Francisco, GTM -08:00)
With Cisco Data Cen...
The Future of Fast: Introducing Nexus 3550 Series and Nexus SmartNICs
Network Insider Live Webinar
Tuesday, August 25, 202010:00 am Pacific Time(San Francisco, GMT-08:00)
The Nexus 3550 Series and Nexus SmartNIC technology, formerly Exablaze...
Original Blog published @ https://blogs.cisco.com/datacenter/spinning-up-an-nvme-over-fibre-channel-strategy
Every so often there comes a time when we witness a major shift in the networking industry that fundamentally changes the landscap...