cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

417
Views
0
Helpful
1
Replies
wuxunda163
Beginner

VSG&VNMC can not get vm's information?

Hello everyone,

I depoly N1KV\VSG\VNMC in my lab enviroment,  using vsg security profile for my vm's access control, i find that every is ok when using IP as condition ;

but when i using vm attribute as rule condition,the policy don't work,for example using vm name .when i ssh to my vsg,then type show vsg vm , i get this

firewall# show vsg vm

VM uuid          : 52484c20-5acb-3197-e668-f56cd70b5c85

VM attributes :

  cluster-name               :                                           

  host-name                  :                                           

  name                       :                                           

  os-fullname                :                                           

  os-hostname                :                                           

  resource-pool              :                                           

  tools-status               :                                           

  vapp-name                  :                                           

Zone(s) :

--------------------------------------------------------------------------------

VM uuid          : 501018d6-a4a0-db1c-21d0-d6b9707011b8

VM attributes :

  cluster-name               :                                           

  host-name                  :                                           

  name                       :                                           

  os-fullname                :                                           

  os-hostname                :                                           

  resource-pool              :                                           

  tools-status               :                                           

  vapp-name                  :                                           

Zone(s) :

this result tell me the vsg get nothing from vcenter without VM uuid,in the Administration---VM Managers,the vcenter state is up,admin state enable,operational state up.

so i want to know here some config i missing or wrong?i appreciate for you help!

Best regard!

xunda.

1 REPLY 1
jaso
Cisco Employee

Hi,

Make sure you add your vCenter info in VNMC, see http://www.cisco.com/en/US/docs/unified_computing/vnmc/sw/1.3/VNMC_GUI_Configuration/b_VNMC_GUI_Configuration_Guide_1_3_chapter_0111.html

so VNMC able to fetch and learn VM and host attributes from vCenter.