Cisco’s Connected Mobile Experience (CMX) solution employs data from the Wi-Fi network to generate information about devices visiting a venue.
At the center of the CMX product is the Mobility Service Engine (MSE), version 10 of which was announced at Cisco Live! Milan. MSE 10 was recently successfully deployed at Mobile World Congress 2015 where it monitored visitor activity for the full event. In this blog, we’ll show how MSE 10 was used to generate custom reports during the event to give some interesting insights into how the conference unfolded.
Hello, How to connect a potential free contact to an IP phone CP7911 en CP7942?
We want to give a signal with a lamp when there is an incomming call.This is because the phone is in a loud admosphere.
Thanks for your help.
How to check whether L2VPN is forwarding MAC and L2 traffic on ASR9K.
My topology : BRAS <-> ASR9K <-> OLTs
In my case, ASR9K has learnt a mac from OLT but BRAS couldn't receive any traffic and MAC from ASR9K.
I'm suddenly having an issue with CSM where it cannot log into my 9k hosts using ssh.I have no issue using the same account SSH'ing directly to the host.By symptom it appears a password issue, but I've verified the password and tried a few different valid...
I'm having problems with configuring cgn over CRS-X. I have three service app inside with different vrfs. My doubt is If I can configure three service app outside for each inside application or just to ha...
So if my reasearch is correct there is no data sheet or info online that explicitly says "layer 3 throughput =x". What I do find is that Max Packets Per Second based on 64 Byte packets would be the only Layer 3 performance info available from cisco....