07-31-2012 04:06 AM
Witam
Urzadzenie nie chce przyjac ustawien przekierowania portow, router zglasza sie adresem MAC 00:00:00:00:00:05.
-----
Device dont change port forwarding settings, router have mac address 00:00:00:00:00:05. Device not working properly.
07-31-2012 09:03 AM
Jesli nie mozesz zastosowac ustawien z WEB UI sprobuj innej przegladarki internetowej jak Firefox, Chrome, itd. Mozesz rowniez sprobowac starszej wersji IE7 albo IE8, lub IE9 z opcja zgodnosci przegladnia.
Jesli to nie dziala zaktualizuj router do nowej wersji software 2.0.1.5 i przywroc ustawienia fabryczne wciskajac przycisk reset przez 35-40 sekund.
If settings do not apply from the WEB UI, try a different browser such as Firefox, Chrome, etc. You may also try older IE 7 or 8 or IE 9 in a compatibility view.
If it still does not apply setting for the port forwarding, give the router a firmware upgrade to the 2.0.1.5 and factory reset the unit holding the reset button for 35-40 seconds.
-Tom
07-31-2012 11:43 PM
Thanks Thomas. I use Firefox, Opera, Chrome and IE8 but some part of web gui dont work(example
http://192.168.103.1/SetupPPPoE.asp a have empty white screen)
. I have firmware 2.0.1.5 and this firmware was installed 3 times, when device not working properly. This is strange device, I must every mont reinstall firmware in device, this behavior is not normal.
08-01-2012 07:17 AM
Most of the time when the web UI does not display correctly, it is an issue with the computer accessing the device. Very, very seldom it is the router.
Try a different computer and see if it yields a result. The router UI use Java and the way computers handle Java are different for whatever reason. The WRV210 is a bit of an older router also, new operating system / security patches sometimes affect how the html loads within the UI for the older products.
-Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide