Configuring RV082 and Load balance

[florent187]

Hello everyone,

I'm asking for your help in order to configure my RV082. Here my problem :

The RV082 is between an ISA server 2006 and 2 Internet Box with Static WAN IP Address.

I didn't find the right configuration in order to have the 2 Internet connections simultaneously.

Here the network configuration :

ISA server 2006 :

External NIC IP : 10.0.101.253

Gateway : 10.0.101.250

RV082 :

Static Ip address : 10.0.101.250

WAN 1 : 81.89.63.61

WAN 2 : 10.0.101.1

Box Internet 1:

Static Ip Address : 10.0.101.254

Wan Ip : 81.89.63.61

Box Internet 2:

Static Ip Address : 10.0.101.251

Wan Ip : 89.158.92.61

I'm only able to have one Internet connection at a time and really can't find the right configuration to have the 2 connections up and add their bandwith. If needed i can give more details.

If someone could help me or give me some advice I would be really thankful.

[riroe]

I would suggest that you call into our Cisco Small Business Support Center (1-866-606-1866) and open up a case to assist you in

your configuration. We will need the serial number of the router when you call to check entitlement.

THANKS