Hello guys how are you today?
My name is Daniel. I need on help on this special request.
Im really senior on cisco config and commands and thats why I post it this message, to see if someone can help me.
The case is: my router 2951 make a lot noise. I check is one fun.... when i see the command sh env the system show me that
DESMS-ROUTER#sh env
SYSTEM POWER SUPPLY STATUS
==========================
Internal Power Supply Type: AC
Internal Power Supply 12V Output Status: Normal
External Redundant Power Supply is absent or powered off
SYSTEM FAN STATUS
=================
Fan 1 OK, Low speed setting
Fan 2 OK, Low speed setting
Fan 3 OK, Low speed setting
Fan 4 OK, Low speed setting
SYSTEM TEMPERATURE STATUS
=========================
Intake Left temperature: 19 Celsius, Normal
Intake Right temperature: 20 Celsius, Normal
Exhaust Left temperature: 32 Celsius, Normal
Exhaust Right temperature: 27 Celsius, Normal
CPU temperature: 50 Celsius, Normal
Power Supply Unit temperature: 30 Celsius, Normal
REAL TIME CLOCK BATTERY STATUS
==============================
Battery OK (checked at power up)
SYSTEM POWER
===============
Motherboard Components Power consumption = 67.4 W
NM/SM slot 1 Power consumption = 12.0 W
NM/SM slot 2 Power consumption = 21.4 W
Total System Power consumption is: 100.8 W
Environmental information last updated 00:00:20 ago
I believed the fan make a lot noise is Exhaust Left temperature because is the more high on temperature.
Do you know if i can config the speed on the fan to stop a lot noise?
Thx
