cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
872
Views
0
Helpful
4
Replies

Internet Access Policy RV130

MarcoZini
Level 1
Level 1

I have a problem with the Internet Access Policy setting in my router RV130:

I have setting two role to block the access to internet in some period. This rule work correctly.

I have also setting some rule to block Porn Website, but this rule don't work: when I try to connect to one of the blocked sites, the connection is not blocked. However if i check the System Log Table i found a warning about the connection to the blocked website.

Does anyone have any idea what the problem might be?

 

Thanks you in advance!!

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

we may required some screenshot of your policy to confirm what is wrong here. what is the Firmware code also good to have information :

 

here is the guide for reference :

 

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5318-configure-web-filtering-on-the-rv13x-and-rv32x-series-router.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Thanks you very much for your reply!

I attach some screenshot of the policy setting.

The firmware version is: 1.0.3.54

 

Unfortunately the firmware is different from the firmware in the guide you linked.

 

Thanks in advance.

 

M.

sunilson
Cisco Employee
Cisco Employee

Hi MacroZini,

 

My name is Sunil Soni from Cisco Small Business Team.

As per my understanding, you want to block porn websites in your network and as web filtering feature is not available on the current running firmware version, you may achieve it using Internet Access Policy.

Kindly refer below mentioned link to access Admin Guide (Page- 92 & 93) of RV130 Router and follow the steps in order to configure Internet Access Policy.

https://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv130w/admin_guide/en/rv130w_admin_en.pdf

 

Hope this workaround would be helpful for you despite you feel challenges, you may get a new service request opened by contacting Cisco Support Frontline Phone Number: 000-800-040-1521

Cisco Support Worldwide Contacts:

https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

 

Thanks for choosing Cisco :)

Thanks for your reply!

 

I tried to follow the Admin Guide you linked but the result is the same I had before.

 

The  fact I don't understand is that in the "log table" the Internet Access Policy violation is detected, but there is no effect on the device that make the violation (that can can browse the blocked site without problem!).

 

Thanks for all your reply!