cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1294
Views
10
Helpful
3
Replies
Highlighted
Beginner

RV220W Printer Sharing Across VLANs

We have 2 VLANs configured to keep 2 groups of PCs apart. Is it possible to allow both VLANs to access the same printer without allowing other traffic between these VLANs ?

Any advice would be much appreciated.

Sent from Cisco Technical Support iPhone App

3 REPLIES 3
Highlighted
Enthusiast

You should be able to yes, when you setup the printer use the IP address as its printer port and it should work fine.

Regards Simon
Highlighted

Thanks for the reply Simon.

Should I place the printer in a third VLAN (as opposed to one of the exclusive VLANs containing the PCs)? If so, will it be enough to enable"Inter VLAN Routing" on this third 3rd VLAN only?

Sent from Cisco Technical Support iPhone App

Highlighted

yes you can do that if you want. i did setup my home lan that way.

Regards Simon