I have turned off the firewall to eliminate that as a culprit and set the appropriate port forwarding rules using WAN1.1 as the interface instead of WAN1. If I set it to WAN1, I can reach the local server on public ip .57, if I set it to WAN1.1 I can't reach it on .58 using the same internal ip. Any suggestions?
My config is as follows:
WAN1
Static IP: x.x.x.57
Subnet: 255.255.255.248
GW: x.x.x.62
WAN1.1
Static IP x.x.x.58
Subnet: 255.255.255.248
GW: x.x.x.62
WAN1.2
Static IP x.x.x.59
Subnet: 255.255.255.248
GW: x.x.x.62
WAN1.3
Static IP x.x.x.60
Subnet: 255.255.255.248
GW: x.x.x.62
