I am not having much success setting up a IPSec VPN tunnel between a RV042 V3 running v4.0.0.07 firmware and PIX 525 running 8.0(4) code.
Let's say the configuration looks like this:
The RV042 has public IP 70.0.0.1 and private LAN IP 192.168.1.1 /24
The PIX has outside IP 69.0.0.1 and inside LAN IP 172.16.0.1 /24
The RV042 is running as DHCP server on it's private LAN
A Windows server at 172.16.0.2 is the DHCP server on the PIX's inside LAN.
I've tried every option on the RV042 for Phase 1 and Phase 2, but I am not certain how to configure the Advanced features especially Aggressive Mode, Compress, Keep-Alive, AH Hash Algorithm and Dead Peer Detection.
On the PIX I've tried the basic setup through ADSM, but it's not as clear or obvious to configure both sides with compatible settings compared to setting up a tunnel between two RV042s.
Could someone post a working configuration for both sides?
Thanks!